PROCEDURE TO Root Samsung Galaxy S-III I9300 Smartphone By Using XXALE8 Firmware

Samsung Galaxy S-III I9300

MY VIDEOS:

Like other Samsung phones, the Galaxy S-III smartphone too have many variants. This article gives the step-by-step instructions to root Samsung Galaxy S-III I9300 device. So, if you are such kind of user make use of this tutorial.

Please be aware that rooting voids your device warranty. But don’t worry you can reclaim the same by applying the original update or stock firmware. You must follow the given below pre-requisites for successful rooting.

DISCLAIMER : We should not be held responsible if anything goes wrong to your device by following the given below procedure. Do everything at your own risk.

Pre-Requsites:

• First make sure about your device model. Don’t implement this procedure in other model if you do so it may brick your device. To check your device model go to“Settings>About Phone>Firmware”
• Next backup all your personal stuffs in your device. Since rooting wipes all your datas it is advisable to take backup of everything.
• Next charge your device fully if you can’t atleast charge upto 75% so then your mobile won’t get switched OFF during the middle of the process.
• Next disable and uninstall all the antivirus and security suites in your computer. So, that it won’t get affected during the middle of the process.
• Finally, enable the USB debugging in your Samsung Galaxy S-III I9300 smartphone from the path “Settings > Developers > USB Debugging”. Make sure that option is ticked.

So, once you followed all the aforementioned steps; next proceed to the procedure to root your device.

Step by Step Instructions to root Samsung Galaxy S-III I9300 on XXALE8 firmware:

• First download the Rooting package and Odin from here to your computer.
• So, once you downloaded the two files extract the rooting package to get the tar file.
• Open the Odin in your computer and turn OFF the device so that it can be entered in the download mode.
• To enter into the download mode you must press the Volume down button and Center button. While holding both buttons simultaneously press the power button until the green robot appears on the screen.
•  The green robot shows that your Samsung Galaxy S-III I9300 smartphone entered into the download mode. In case, it doesn’t appear your device will be still in normal mode. So, you need to retry the same process.
• Once you sure with your device entered into the download mode connect the phone to the computer after that the ID:COM section turn yellow which will indicate that your device entered into the download mode.
• Incase, if the ID:COM section doesn’t turn yellow then you need to check the following three things:
• First, ensure the USB drivers in your computer are installed.
• Next make sure the “Samsung KIES” option is ticked before connecting the device to the computer.
•  Next, click on the “PDA” and select “CF-Root-SGS3-v6.0″ and click on “Start” button to start the rooting process.
• Once your device is rooted, the device will reboot automatically when the home screen appears disconnect your phone from the computer.
•  In case, if you get force close errors, then turn off your device and enter into the recovery mode by pressing Volume up key+Center button. By holding both the buttons press the power button simultaneously.
•  In the recovery mode select the “Wipe data/Factory reset and Wipe Cache partition” and then reboot your device by selecting the “reboot system now”option. Once it is done, you will get the option to restarting the device.
• Incase, the update process get stopped due to any reason just reinsert the battery and follow the process from the start. That’s it!