How to Update OR REBOOT Galaxy S3 i9300 with Glance S4 Custom ROM Firmware (based on Galaxy S4 UI)

1. As you can already tell, on the first step, the Glance S4 software must be downloaded.

MY VIDEOS:

1. So, go here and get the firmware.
2. Save it on your computer; preferable on desktop.
3. Don’t unzip the file.
4. Use the USB cable and your Galaxy S3 and connect the device with your computer.
5. Then, copy-paste or drag and drop the update file from your computer to your phone’s SD card.
6. Unplug the USB cable.
7. Turn off your S3.
8. Reboot in recovery.
9. Select “wipe data factory reset” and “wipe cache partition”.
10. Choose “advance” and “wipe dalvick cache”.
11. Return to main menu of recovery.
12. Select “install zip from SD card” and “choose zip from SD card”.
13. Pick the firmware file.
14. Install the same.
15. In the end reboot your smartphone.
16. If a boot loop is what you get, return to recovery menu and select “wipe data factory reset” and “wipe cache partition”; reboot. If the problem is still there try to repeat the update procedure from the beginning.

Good job, you are done. The Samsung Galaxy S3 I9300 has been successfully installed with the Android 4.2.2 Jelly Bean OS powered Glance S4 Custom ROM firmware. Remember that this software is based on the Samsung Galaxy S4 UI, so test the new features, apps and capabilities and then return here for sharing the results and your impressions with us.